MAKRO
SAI LUAT

Project Gallery

Project Overview

The Makro Sai Luat project involved strengthening warehouse floor slabs to increase Live Load capacity from 600 kg/m² to 900 kg/m², meeting the operational requirement for heavier goods storage.

SMARTFIBER-SHEET UT70-30 high-performance carbon fibre sheet was selected and installed on the soffit of the slab to increase Flexural Strength and reduce deflection — without any demolition or addition of new columns and beams, saving both time and construction cost.

Installation Process

1. 1

   Structural Analysis & Strengthening Design

   The engineering team inspected the slab condition and calculated the required Live Load demand, then designed the layout and quantity of SMARTFIBER-SHEET UT70-30 to safely achieve the 900 kg/m² target.

2. 2

   Concrete Surface Preparation

   The slab soffit was cleaned and abraded to remove dust, grease, and moisture, ensuring maximum epoxy bond between the concrete substrate and the carbon fibre sheet.

3. 3

   Installation of SMARTFIBER-SHEET UT70-30

   SMARTFIBER-SHEET UT70-30 was applied to the slab soffit following the engineered layout, bonded with high-quality epoxy adhesive and rolled to expel all air voids, ensuring full load transfer into the carbon fibre.

4. 4

   Inspection & Handover

   Bond integrity and material completeness were verified at every location. Installation records and a final report were submitted to the project engineering team prior to formal handover.

Strengthening Materials Used

Project Results